How to Root Galaxy S3 I9300 on XXELL1 Android 4.1.2 Jelly Bean Firmware -If you want to root your Galaxy S3 I9300 running on XXELL1 Android 4.1.2 Jelly Bean official firmware, then follow out step by step procedure below.
Before we proceed, make sure:
- You have installed your Galaxy S3 I9300 USB drivers on your PC.
- You need to enable USB debugging mode which is deactivated by default.
- You device should have 70-80% charge remaining.
- Your Galaxy S3 I9300 should be factory unlocked.
- Backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
- The update is only meant for Galaxy S3 I9300, so don’t try it on other variants
How to Root Galaxy S3 I9300 on XXELL1 Android 4.1.2 Jelly Bean Firmware
Step 1) Download Root XXELL1 Android 4.1.2 for Galaxy S3 I9300.
Step 2) Download ODIN v3.07.
Step 3) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button until you see Android logo with triangle on screen.
Step 4) Now open ODIN on your PC and connect your Galaxy S3 I9300 to your computer.
Step 5) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn yellow and will show the COM port number.
Step 6) Select the downloaded file to install by following below steps:
Click on PDA and select CF-Auto-Root-mo-moxx-gti9300.tar.md5 file.
Step 7) Make sure the Auto Reboot and F.Reset Time options are checked in ODIN.
Step 8) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
Step 9) When the installation is completed, your phone will restart.
Now you have successfully rooted XXELL1 Android 4.1.2 on your Galaxy S3 I9300.
0 comments:
Post a Comment - Back to Content